Termidor
APVMA Code :54624 |
Active Constituent(s): 100g/L fipronil
Group 2C Insecticide
|
| Overview |
Termidor is a non-repellent, low odour, soil applied residual termiticide for the protection and control of subterranean termites in and around domestic and commercial structures. |
| Recommended Uses |
For the protection of structures from subterranean termite damage and the control of subterranean termites around domestic and commercial structures as specified in the label. |
| Advantages |
Termidor is non-repellant and non-detected by subterranean termites. Unique "Transfer Effect". Long residual life when applied as a barrier treatment. Water based, odourless formulation. |
| Benefits |
Fewer call backs, resulting in satisfied homeowners. Termidor is the only product with the "Transfer Effect" which means that the product not only provides a barrier to termite entry, but may also be transferred to other termites and wipe out the entire colony. |
| Mode of Action |
Termidor Residual Termiticide is a Group 2C insecticide which acts via contact and ingestion, to block the GABA receptors in the central nervous system and therefore disrupting nerve impulses, resulting in death. |
| Chemical Group |
phenyl pyrazole |
| General Instructions |
Chemical treatment for termite control around existing buildings should be considered to be part of an integrated approach to reduce the risk of termite attack and should be conducted by LICENSED PEST CONTROL OPERATORS. The steps below best describe the procedure for optimum termite management:
-The building owner should try to minimise water entering under and around the building and improve drainage to reduce moisture accumulating in these areas.
-Ventilation of sub-floor areas should also be optimised to reduce moisture accumulation.
-The area under the floor should be kept free from any debris-timber such as off-cuts of wood or firewood.
-Treat with a residual chemical soil barrier such as TERMIDOR in compliance with AS3660.2.
-Regular inspections should be carried out (at least annually as recommended by AS3660 Series).
-If any additional subsequent building or landscaping work causes disruption to the chemical soil barrier it must be restored to maintain protection.
Australian Standards
Professional Pest Managers installing a chemical soil barrier around an existing building should be familiar with the Australian Standard 3660.2 which provides information relating to installation of chemical soil termite barriers.
Period of Protection
Data currently available indicates that this product, when applied as a soil treatment around or under a building or structure in accordance with this label, will be effective against subterranean termites for a minimum period of eight years. Delayed mortality effects may be observed, meaning termites may live and continue to be active several weeks after penetrating the treated zone.
To reestablish the treated zone after the 8 year period of protection, re-application at full rates is required.
The actual protection period will also be affected by factors such as termite pressure, climatic and soil conditions and subsequent soil disturbance.
Re-inspection
As with all chemical termiticides, regular inspections (at least annually) by a competent licensed Pest Control Operator are recommended as bridging and breaching of barriers can occur. The need for retreatment should be determined as a result of these inspections.
|
| Precautions |
Precaution
Residents and pets should not be allowed in a room being treated. Any spills should be cleaned up before leaving the room (refer to the MSDS). Ensure all heating/air conditioning ducts, air vents, plumbing pipes, sewer lines, floor drains, heating pipes and electrical lines/conduits are known and identified before commencing any application of termiticide. Do not puncture or contaminate any of these. Avoid application around edible plants.
Re-entry Period
DO NOT re-enter treated areas until spray has dried |
